Review of Vandy Vape PYRO V4 RDTA
Some vapers with more than two or three years of vaping experience probably remember the boom associated with the appearance of such tanks as RDTA or bacodripok in the vape market. Someone is skeptical about them, considering this format not very convenient, someone, on the contrary, is sure that thanks to the design features the vaper can get a good taste of the drip and autonomy of the tank. In any case, this format of atomizers is not only not forgotten, but also constantly replenished with new devices. Vandy Vape company has a line of PYRO RDTA, which currently includes three devices, deciding to expand it a little and at the same time to please its fans, PYRO V4 RDTA was presented.
General Information
Vandy Vape PYRO V4 RDTA is a medium sized bacodrip designed to accommodate two spirals, with bottom blowing implemented with a large number of small holes for maximum flavor and bulk. Despite the fact that the tank does not have a lot of decorative elements, it does not look very strict due to its quite interesting shape and tapered top part. The atomizer is designed for installation of two spirals (you can put one if you want), which are blown from below with a large number of holes under them and on the sides, so you can get a great taste and bulk. You can buy the Vandy Vape PYRO V4 RDTA in six colors of steel, black, rainbow, gunmetal, gold and gray.
Kit
Vandy Vape devices are always packaged very decently, and the new atomizer is no exception. In the box the vaper will find:
PYRO V4 RDTA atomizer;
A spare glass;
Two prewound spirals Triple Fused Clapton Coil 0.41 Ohm;
Coil Trimming Tool;
Screwdriver;
Hexagon;
Squonk pin;
Replacement Eringes;
Replacement screws;
User’s Manual.
Appearance and Design
It is worth noting that Vandy Vape, which against the background of the mass production of other manufacturers pod-mods and POD-systems, has released only a couple of devices of this format, remaining faithful to the traditional tanks, drip and box mods. A separate place in the range of the company takes a line of bacodrips PYRO, which has already managed to win the love of vapers, as the devices of this series have a good flavor transfer and ease of maintenance. The company decided not to stop and presented a new device of the Pyro series, which bears the proud name of Vandy Vape PYRO V4 RDTA.
It looks Vandy Vape PYRO V4 RDTA very nice without any special decorative elements and decorations, but at the same time we can not say that it is strict, although at the base, on the top cap and in the center there are notches, but they are not a decorative element, but designed for more convenient unwinding of the tank. The tankodrip is hard to call shallow, as its seating diameter is 25.5mm, so on some box mods it will overhang the edges a bit.
The Vandy Vape PYRO V4 RDTA uses a traditional 810th delrin-less drip tip, which you can always replace with any other from your collection. The volume of the tank cannot be changed, but it is quite decent initially 5 ml. The kit comes with a squonk pin, which can significantly increase the volume of the tank by installing it on the squonk mod.
Base, blowing and usage features
Naturally, the main feature of the Vandu Vape PYRO V4 RDTA is hidden under the dome. The base is made rather interestingly, it looks more like a semicircle with holes, in which there are four holes to install two spirals. Of course, you can also install one coil, if the vaper wishes.
Installation of spirals as simple and clear as possible they are installed vertically, and the legs are fixed horizontally with screws hidden in small holes.
Laying the absorbent cotton also will not cause questions, as there are wide holes for it, and the length can be used almost to the bottom of the tank (vapers often argue about how to properly lay absorbent cotton in RDTA and what length should be its ends for optimal impregnation).
The blowing system is quite interesting. The air intake is lateral, and the air flow goes down through the channels in the deck and then goes to the coil, blowing it from the bottom and from the side.
In order to blow the maximum area of the coil, the base has a lot of small holes, thanks to which you can get a guaranteed great taste and bulk.
The blowing is adjusted by rotating the dome.
Vandy Vape PYRO V4 RDTA is not very convenient to refill, because in order to get access to the refill hole, you must remove the dome, it is located on the side of the base. It is desirable to use bottles with a thin spout, because the hole is small.
Conclusions and impressions
Vandy Vape PYRO V4 RDTA is a bacodripka that is sure to please fans of big clouds and bright flavor delivery, as its design is designed specifically for this. The vaper who decides to buy the Vandy Vape PYRO V4 RDTA will get a pretty easy to maintain atomizer, with good flavor and bulk.
Advantages and disadvantages
Disadvantages .
Not very convenient refilling;
Not the largest volume of the tank.
Advantages
Stylish design;
A large selection of colors;
810th drip tip;
Squonk pin;
Convenient installation of the coil;
Easy absorbent cotton packing;
Original blow down and side blow system;
Great taste and flavor.
