Innokin CoolFire Z60 Zlide top kit

It’s hard to find a vaping company that doesn’t produce PODs and submods, because devices of this format are in great demand among vapers. But many vapers categorically do not want to switch to sub-mods and POD-systems, giving preference to the traditional “tank – box-mod” combination. Such vapers are not as few as it seems, and it is for them quite famous company Innokin periodically releases more and more new devices. One of the most famous and relevant lines from this manufacturer is considered a series Z, which has already managed to win the trust of users. Deciding once again to remind themselves and at the same time to please their fans, the company has presented a starter kit Innokin CoolFire Z60 Zlide top kit.

General Data

Innokin CoolFire Z60 Zlide top kit – compact starter kit, consisting of box mod CoolFire Z60 mod with built-in battery and good functionality, and atomizer Zlide Top Tank, designed for Z-series vaporizers. The Zlide Top Tank is one of the universal tanks that can be used for both tight MTL inhalation and more loose bongs. Due to the wide range of Z-series vaporizers the vaper can easily select the best option depending on his preferences. The CoolFire Z60 box mod features compact size, high capacity built-in battery, and a productive and functional chipset. The Innokin CoolFire Z60 Zlide top kit is available in seven colors – purple, blue, gunmetal, steel, black, pink and red.

It is worth paying tribute to the developers of the Innokin Company, which relatively simple starter kit was completed quite decently. Therefore, in the box the vaper will be able to find:

– Coolfire Z60 Mod box mod;

– Atomizer Zlide Top Tank (2ml);

– DuoPrime Z Coil 0.6 ohm vaporizer (pre-installed);

– Z Coil 0.3 ohm vaporizer;

– Replacement glass;

– Extra drip-tip;

– Oring Set;

– USB Type-C cable;

– User’s Manual.

Zlide Top Tank Atomizer

It cannot be said that the Chinese company Innokin is the undisputed leader in the vape market, but it does not surrender its confident position as a “middleweight”. The company periodically releases quite interesting and practical devices of various formats, which almost immediately after the presentation find their fans. Despite the total fascination of producers with POD systems and sub-mods, the company does not forget the vapers who prefer traditional box mods and tanks. Therefore, it decided to continue the quite popular Z series and presented Innokin CoolFire Z60 Zlide top kit – a compact and interesting starter kit.

Over the design of the new device the company did not work particularly hard and make dramatic changes, so the vaper is waiting for a neat boxy mod, a little chubby, with rounded corners and edges, which has excellent ergonomics. The device is small – 119,45*35,73*27,02 mm, and the mounting area for atomizers with a traditional 510 mm connector is designed for tanks or drips up to 25 mm in diameter.

The Innokin CoolFire Z60 Mod uses a built-in 2500 mAh battery, which is a sure claim to autonomy, but do not forget that the battery life depends on the vaping style and operating power. Charging the battery is done using the USB Type-C connector, located under the control buttons, with a current of 1.7A.

An interesting solution, which has been forgotten by many vape manufacturers, can be considered a mechanical on and off button, which is located on the bottom end of the device.

Innokin CoolFire Z60 Mod works under the control of proprietary chipset, thanks to which you can get not only the power of 6-60 watts, but also four modes of operation – VW, VV, Coil+, Refresh. The device is equipped with a small color display, on which you can find a standard set of information about the operation of the device.

Zlide Top Tank Atomizer

The Zlide Top Tank atomizer is a traditional tank that you can confidently use on other box mods if you want, as it has a standard 510 connector. The tank is 24,5 mm in diameter. It uses the classic 510 “pawn” drip tip, which is easy to replace, with another one included for free hookah puffing.

This tank is designed to use Z-series interchangeable vaporizers, the variety of which is so great that even a demanding vaper can find the best option depending on his preferences.

The air intake in Zlide Top Tank is upper, so the tank can be safely attributed to the “non-pouring”. Adjustment of the draw is done by turning the ring with notches on the top of the tank.

In order to refill the atomizer you just need to slide the top cap straight and pour 3.5 or 4.5 ml of liquid into the small hole, depending on the set glass.

Conclusions and Impressions

We can confidently say that CoolFire Z60 Zlide top kit is another successful starter kit from Innokin, which is great for vapers looking for a compact, practical and functional device. The kit is interesting for its autonomy, versatility, ease of use and maintenance.

Advantages and disadvantages

Disadvantages

– It is problematic to get a full-fledged tightening;

– Rather large weight.

Advantages

– Compact size;

– Ergonomic design;

– Powerful battery;

– Fast charging;

– High-performance chipset;

– Good functionality;

– Large selection of vaporizers;

– Non-Spill;

– 510drip-tip;

– Convenient refilling.