dotMod dotPod Nano POD Kit
The vape industry is developing on rather unclear principles, as it is unlikely that the average vaper, successfully using a box mod from Voopoo or Lost Vape for two batteries and a tank with two Triple Fused Clapton, that all these devices will cease to be relevant and they will be replaced by “iteshki”. Of course, we are not talking about simple “egoshki” and their new generation – POD-systems and sub-mods, which have become by far one of the most popular formats. The dotMod company is rightfully considered one of the trendsetters in this class of devices – their dotPod has been the sales leader for years. But as such POD-systems the company has not yet released. Deciding to correct this mistake, the company has presented the dotMod dotPod Nano POD Kit.
General Data
The dotMod dotPod Nano POD Kit is a compact POD system with a pretty powerful built-in battery, designed to accommodate interchangeable cartridges with built-in vaporizers. The form factor, in which the device is made, has already been used by other manufacturers many times, but it is still relevant – it is a square device with rounded edges and corners, and the side panels are made of eco-leather. The device is as simple as possible, so it is activated by puffing and has no controls. The cartridges with built-in vaporizers on the 0.8 and 1.0 ohm grid will please the taste. Buy dotMod dotPod Nano POD Kit is available in six colors – orange, red, blue, black, light gray and brown.
Equipment
Although the device belongs to the simple series, the developers decided to complete it so that it would not be ashamed. Therefore, in a little pathosy black box the vaper will find:
– A dotPod Device battery pack;
– 0.8ohm dotPod Mesh Pod;
– A 1.0ohm dotPod Mesh Pod;
– USB Type-C cable;
– Lanyard;
– User’s Manual;
– Warranty card.
The dotPod Device battery pack
It is unlikely that any vapers will argue about the fact that dotMod devices are a separate category of vape devices, which in most cases are considered almost exemplary. We can’t say that the company regularly releases new devices, but once they are introduced, they become sales hits 98% of the time. Given the popularity of sub-mods and POD-systems the company decided to repurpose the production, and quite successful, as it was released one of the most popular in the last few years dotMod dotAIO device, and then the second version of it. But such success is not enough for the company, and it decided to occupy its niche also in the segment of POD-systems, presenting the dotMod dotPod Nano POD Kit – a compact and interesting device.
Just look at this POD-system and you immediately understand who its developer is, because its design is distinguished by neat lines, conciseness and some special luster, which is not conspicuous. The side panels of the device are made of eco-leather, which makes it look very expensive and stylish. POD-system looks like a square (not a new solution, but a win-win), so it has the appropriate dimensions – 49,5 * 49,5 * 15 mm. Due to the use of zinc alloy and eco-leather device is not the lightest – 79.3 grams, but the manufacturer has even equipped it with a lanyard to wear around the neck.
Power dotMod dotPod Nano POD Kit provides built-in rechargeable battery 800 mAh, which, given the high resistance cartridges will be quite enough for two to three days of battery life. The battery is charged using the USB Type-C connector located on the bottom end of the device.
The dotMod dotPod Nano POD Kit is a fairly simple POD system that has no controls, so it is activated by puffing. The maximum power of the device – 18 watts, and it is set automatically depending on the resistance of the installed vaporizer. To monitor the battery level on the bottom surface there is a tiny LED.
The dotPod Pod cartridge
Considering the fact that dotMod has not yet produced such devices, it makes sense that special cartridges were developed for the dotPod Nano. They are made with a flattened mouthpiece and in the battery pack they are held by magnets.
The developers offer vapers two variants of dotPod Nano POD cartridges – 0.8 and 1.0 ohms. Both are made on the mesh, so good taste is guaranteed. There is no airflow adjustment, and the draw is tight, as close as possible to MTL.
To refill the cartridge you take it out of the battery box, open the silicon plug on the side and pour 2 ml of liquid into the small hole.
Conclusions and impressions
The fact that dotMod decided to release exactly a POD system is logical and justified, as it also needed to cover this segment. The device turned out to be very decent and interesting, made in the best traditions of the company, and at the same time it is as simple as possible. Maybe it costs a little bit more than the Chinese analogues, but the vaper is guaranteed to get a reliable and productive device that will faithfully serve you for many years.
Advantages and disadvantages
Disadvantages
– It is necessary to remove the cartridge from the battery box for refilling;
– Lack of airflow control, even the simplest one.
Advantages
– Compact size;
– Low weight;
– Stylish design;
– The good complete set;
– Capacity battery;
– Fast charging;
– Activation when you draw;
– Two versions of cartridges on the grid.
