Review of Vapes: what does resistance affect?

I would like to dedicate this article to a rather important indicator, resistance? What is it, why is it necessary and how can it affect our device. Let’s start small, what is resistance? Resistance is a quantity that characterizes the properties of a conductor that conducts electric current. In other words, resistance affects the force of current passing through the coil and other heating components.

Pay

As a rule, in box mods the resistance adjusts itself. Or rather, you set a resistance that is comfortable for you, and the board automatically selects the required voltage for the appropriate coils and power. Roughly speaking, in this case resistance has little effect. australian vaping Since the battery gives the same voltage, and when the resistance is set, the board either increases or decreases the current.

Mechmod

Here, on the contrary, there is no board, so the current comes directly from the battery, so the correct selection of resistance is necessary here.

In most cases, mechanical mod means a large amount of steam and increased brightness and taste. The lower the resistance of the evaporators, the more intense and faster the heating occurs. Therefore, for a thick cloud of vapor, you need to select evaporators with the lowest resistance.

A small resistance does not in any way affect the dimension of the current itself, due to the current being reduced due to the small resistance, the rest of the voltage goes through the coils and heats up. So the coils heat up instantly, a large amount of liquid evaporates, thereby wasting current and the battery must be charged.

With great resistance everything is different. An element that heats up interferes with the good flow of current, so the coils heat up more slowly. The battery can be charged less often, because it does less load than it can, because resistance limits it in this.

POD systems

There are currently no POD systems with the ability to adjust power, airflow or tightening. Subsystems with the ability to regulate power are also adjusted to the board, the resistance only affects the required power.

Systems without adjustment are similar to mechanical mods; resistance affects the heating rate and the battery life.

Evaporators

You can determine which puff is loose or tight using a vaporizer. Vaporizers with low resistance are more often used with a free puff; the battery is quickly discharged as higher power is required. But the flavor and richness are at a high level.

Vaporizers with higher resistance produce a tighter draw, with a less sweet taste and less vapor.

As a rule, almost every device can be used with different resistances, so experiment and adjust it to suit you.

Conclusion

If you look at the principle of operation of a vape, it can be compared to the neck of any bottle.

Resistance, or the diameter of the spiral, is the neck.

The force with which we press on the bottle to pour out the liquid is tension.

How long the water will flow is the current strength.

Let’s say we have 2 bottles of water and we need to hit a wall that is a meter away. One bottle with a narrow neck, the second with a wide neck.

So, we take the first bottle and pour out the water by pressing the bottle, like a water pistol. The stream of water reaches the wall calmly, with little effort required. And in vaping, when using a high-resistance vaporizer, less power is required.

Second bottle: in order for the jet to fly, you need to press hard and sharply on it, and then it will not fly so quickly and “energetically”. Therefore, vaping with a low resistance vaporizer requires a large amount of power.

But if you jump with all your might onto a bottle with a small neck, all the water will splash. Therefore, you need to carefully use small spirals with high power. It’s better to harmonize.