Review of Kangertech Dripbox Kit

We haven’t heard anything from Kangertech for a long time, and now they have released a new device, or rather, even a set that includes a drip tip and a bottomfeeder (this is when the tank is located at the bottom and the liquid enters the drip tray through a pin) called Dripbox Kit.

Kangertech Dripbox Kit

The design is as always recognizable, Kangertech has been releasing everything in the same design for a long time and this is not a minus, since all of their products look decent. australian vape shop brisbane The size is very similar to the K120\200 box mod, but you will immediately notice the tank inside the case. The standard colors for Kangertech are black, white and red. The control element is just one Fire button.

Kangertech Dripbox Kit

The package is very impressive, it includes the bottomfeeder device itself, a drip tip, a spare tank, a micro-usb cable, a screwdriver, a cotton, a replaceable RDA base (WAAAT???), spare bolts/orings, instructions, maybe something else I’m looking for didn’t notice.

The box mod has a board installed which, as I understand it, works in the normal mechanical mode mode, but there are also restrictions in the minimum resistance of 0.2 ohm and, as the developer states, the maximum power with minimum resistance can reach 60 W. The box mod runs on one 18650 battery, battery compartment cover , as I understand it, is located in the lower part of the body.

Kangertech Dripbox Kit

Now I will tell you how the bottomfeeder works. To be honest, everything is simple. You fill the tank, which by the way is 7 ml, insert it, put in the drip tip (but a regular one won’t suit you), and by simply pressing the tank, the liquid flows through a special channel into the well and wets the cotton wool.

Kangertech Dripbox Kit

Now about the RDA itself, it is not quite ordinary, in the picture it looks like a regular RDA base on two stands, but this is not so. In fact, this is a replaceable RDA base, and I honestly don’t understand how it should work, and I don’t understand what the point is either, but according to the developer, their price will be the same as that of conventional replaceable evaporators for Kangertech products. Judging by the video that I will attach below, you can service the base yourself, since I saw that there are bolts there, only they are located on the side like Velocity, and in the picture, which is available, there are only two bolts on top, this remains unclear to me .

To be honest, the device is very interesting, and I would like to hold it in my hands and try it out, but I don’t know if I would want to buy it for permanent use. But we can definitely say that the device will succeed.